PIC18F25J10-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 40MHz |
| Base Part Number | PIC18F25J10 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 24mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F25J10-I/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It comes in the package?of a Tube. A PIC core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. A total of 21 I/Os are available on this device. A comparable component can be found by using the base part number PIC18F25J10. The terminals of this device are located at DUAL. A 28 termination is contained within it. It is a member of the PIC? 18J series of electrical components. High efficiency is possible due to the 3V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. A method of mounting is used, which is Through Hole. 28 pins are on it in total. It falls under the category of Microcontrollers. The devices have a memory size of 32kB that can be used to store programs and data. It should be noted that 24mA represents the maximum supply current. When working at a frequency of 40MHz it is able to achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. The number of timers and counters is 3. There is an oscillator type Internal used in this circuit.
PIC18F25J10-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F25J10-I/SP Applications
There are a lot of Microchip Technology PIC18F25J10-I/SP Microcontroller applications.
- Accu-check
- Hard drives
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Process control devices
- Toasters
- Auto-breaking system
- Laminators
- Entertainment-radios, CD players, televisions
- Heater/Fan
- Fax machines
