PIC18F25J10T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Base Part Number | PIC18F25J10 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~3.6V |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 24mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 16 |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F25J10T-I/ML Overview
To save space, it is included in the 28-VQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. In the package Tape & Reel (TR), it is included. It is equipped with a PIC core processor. During work, the temperature should remain at -40°C~85°C TA. Memory type FLASH is used for program memory. 21 I/Os are present on the device. It has a part number of PIC18F25J10 that can be used to locate similar components. The terminals are positioned at QUAD. In this case, there are 28 terminationals. The PIC? 18J series contains this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. A number of 28 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. This device has a total of 28 pins. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 32kB. There is a maximum current supply of 24mA. At a frequency of 40MHz, it exhibits excellent efficiency. While employing 5V, designers can maximize its supply voltage adaptability. A total of 3 timers/counters have been set up. Using a Internal oscillator type, it works well.
PIC18F25J10T-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F25J10T-I/ML Applications
There are a lot of Microchip Technology PIC18F25J10T-I/ML Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Hand-held metering systems
- Projectors
- Sonography (Ultrasound imaging)
- Magnetic resonance imaging (MRI)
- Industrial instrumentation devices
- Electrocardiogram (EKG)
- Heart rate monitors
- Graphic terminals
- DCS control intelligent sensor
