PIC18F25J10T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2006 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 40MHz |
| Base Part Number | PIC18F25J10 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~3.6V |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 24mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 16 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F25J10T-I/SS Overview
Due to its space-saving qualities, it is available in the 28-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. It comes in the package?of a Cut Tape (CT). With a processor of PIC cores, the device is powered. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 21 I/Os have been provided by the device. In order to find similar components, it has a base part number of PIC18F25J10. A DUAL position is assigned to its terminals. 28 terminationals are present. The PIC? 18J series includes this electrical component. A total of 28 pins are required to construct this device. It is mounted based on the method of Surface Mount. It is equipped with 28 pins in total. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 32kB. In this case, 24mA represents the maximum current supply. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. When 5V is employed, designers can fully utilize its adaptability and supply voltage. It appears that there are 3 timers/counters in use. There is an oscillator type Internal used in this circuit.
PIC18F25J10T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F25J10T-I/SS Applications
There are a lot of Microchip Technology PIC18F25J10T-I/SS Microcontroller applications.
- Smart instruments
- Heater/Fan
- Fire detection & safety devices
- Entertainment-radios, CD players, televisions
- Fabric
- Calculators
- Mobile computers
- Automatic staplers
- Oscilloscopes
- Electronic jamming systems
