PIC18F25J50-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F25J50 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| CPU Family | PIC |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 2 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F25J50-I/SO Overview
A space-saving advantage is that it is included in the 28-SOIC (0.295, 7.50mm Width) package. Surface Mount is the way to mount it. It is available in the Tube package. The device has a PIC core processor. Maintain a temperature of -40°C~85°C TA while working. FLASH is the type of program memory used by it. A total of 16 I/Os are present. It has a part number of PIC18F25J50 that can be used to locate similar components. A DUAL position is assigned to its terminals. As far as terminations are concerned, there are 28 terminations present. This electrical component is part of the PIC? XLP? 18J series. Because of the 3.3V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A total of 28 pins are used in its construction. The mounting of this device is carried out following the method of Surface Mount. A total of 28 pins are attached to it. It falls under the category of Microcontrollers. In order to store data and programs, the devices have a memory size of 32kB. The system is highly efficient when working at a frequency of 48MHz. In total, there are 5 timers and counters. As part of the PIC CPU family, this component is included. The oscillator type Internal is used to operate the device.
PIC18F25J50-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F25J50-I/SO Applications
There are a lot of Microchip Technology PIC18F25J50-I/SO Microcontroller applications.
- Speed meter
- Industrial instrumentation devices
- Petrochemical
- Entertainment products
- Electrocardiogram (EKG)
- Communication-bluetooth, Wi-Fi, radio
- Automatic staplers
- Leakage current tester
- Temperature sensing and controlling devices
- Toys
