PIC18F25J50T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F25J50 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Supply Current-Max | 22.7mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F25J50T-I/SS Overview
For space savings, it is available in the 28-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. Package Tape & Reel (TR) contains it. Devices with PIC core processors are available. It is important to keep the temperature at -40°C~85°C TA while working. It has a type of program memory of FLASH. It has a number of 16I/Os. A comparable component can be found by using the base part number PIC18F25J50. DUAL is the position of its terminals on the board. It has 28 terminationals. An electrical component such as this is included in the series PIC? XLP? 18J. High efficiency is possible due to the 3.3V supply voltage. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. A number of 28 pins are used to construct it. Mounting is performed in accordance with Surface Mount. It is equipped with 28 pins in total. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 32kB. It should be noted that 22.7mA represents the maximum supply current. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. 5 timer/counters are present. It is part of the PIC CPU family. The oscillator type Internal is used to operate the device.
PIC18F25J50T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F25J50T-I/SS Applications
There are a lot of Microchip Technology PIC18F25J50T-I/SS Microcontroller applications.
- DDC control
- Telephone sets
- Mice
- Glucose monitoring systems (for Type 1 Diabetes)
- Entertainment-radios, CD players, televisions
- Electrocardiogram (EKG)
- Set-top boxes
- Christmas lights
- Industrial instrumentation devices
- Digital set-top boxes
