PIC18F25K20-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F25K20 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 25 |
| Number of PWM Channels | 2 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F25K20-E/ML Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. Surface Mount is used for mounting. There is a Tube package available for it. A core processor of PIC is present in the device. The temperature should be kept at -40°C~125°C TA while working. Its type of program memory is FLASH. There are 24 I/Os on it. In order to find similar components, it has a base part number of PIC18F25K20. The terminals of this device are located at QUAD. This circuit consists of 28 terminationals. An electrical component such as this is included in the series PIC? XLP? 18K. As a result of the 3V supply voltage, high efficiency is possible. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. There are 28 pins used in the construction of this device. The mounting of this device is carried out following the method of Surface Mount. There are 28 pins on it. This is a component included in Microcontrollers. In the device, there is a memory capacity of 32kB which may be used to store programs and data. The maximum supply current is set at 15mA. This device works well at 64MHz frequency when it is operating at a high rate of efficiency. There are currently 4 timers/counters set up on the system. As part of the PIC CPU family, this component is included. A chip with 25 programmable inputs/outputs is available. Internal is the oscillator type it uses.
PIC18F25K20-E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F25K20-E/ML Applications
There are a lot of Microchip Technology PIC18F25K20-E/ML Microcontroller applications.
- Medical instruments chromatographs
- Christmas lights
- Digital cameras
- Smart highways (navigation, traffic control, information monitoring and car service)
- Copiers
- Home appliances
- Missile control
- Playstation
- Process control devices
- Food and beverage
