PIC18F25K22-E/SP
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES 2.3V MINIMUM SUPPLY AT 16 MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 48MHz |
| Base Part Number | PIC18F25K22 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 19x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 7 |
| ROM (words) | 16384 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 25 |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
PIC18F25K22-E/SP Overview
There is a 28-DIP (0.300, 7.62mm) package available to save space. In this case, it is mounted using the method of Through Hole. There is a Tube package available for it. The device has a PIC core processor. The temperature should be kept at -40°C~125°C TA while working. Memory type FLASH is used for program memory. 24 I/Os can be found on it. A component with the same part number as PIC18F25K22 can be compared to other similar components. At DUAL, its terminals are located. This circuit consists of 28 terminationals. In the PIC? XLP? 18K series, this electrical component is found. By using a 5V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 28 pins are required to construct this device. There are 28 pins on it. It falls under the category of Microcontrollers. A device with a memory size of 32kB can store programs and data. In this case, 12mA represents the maximum current supply. There is 2/5V power source in this device. At a frequency of 48MHz, it exhibits excellent efficiency. There are 7 timers/counters. This part is an integral part of the PIC CPU family. There are 25 programmable input/output ports on the chip. There is also the property of ALSO OPERATES 2.3V MINIMUM SUPPLY AT 16 MHZ associated with it. The oscillator type Internal is used to operate the device.
PIC18F25K22-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F25K22-E/SP Applications
There are a lot of Microchip Technology PIC18F25K22-E/SP Microcontroller applications.
- Electrocardiogram (EKG)
- DCS control intelligent sensor
- Scanners
- Speed meter
- Aerospace navigation systems
- Walkie talkies
- Instrument control
- Home appliances
- Accu-check
- 3D printers
