PIC18F2610-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 25MHz |
| Base Part Number | PIC18F2610 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 20 |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2610-E/SP Overview
Due to the benefits of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. Tube is the package that contains it. It is equipped with a PIC core processor. In order to work effectively, the temperature should be kept at -40°C~125°C TA. In terms of its program memory type, it is FLASH. 25 I/Os have been provided by the device. Based on the PIC18F2610 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. It consists of 28 terminationals. It is a member of the PIC? 18F series of electrical components. It is possible to achieve high efficiency with a 5V supply voltage. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. A total of 28 pins are used in its construction. Mounting is performed in accordance with Through Hole. It has a total of 28 pins on it. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. It is powered by a 5V?source. When working at a frequency of 25MHz it is able to achieve excellent efficiency. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 4 timers/counters are present. As part of the PIC CPU family, this component is included. Using an oscillator type Internal, it operates.
PIC18F2610-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2610-E/SP Applications
There are a lot of Microchip Technology PIC18F2610-E/SP Microcontroller applications.
- Projectors
- Aerospace navigation systems
- Smoke alarms
- Calculators
- Computers and laptops-video calling, email, blogging
- Blenders
- Xbox
- Security systems
- Broadband technology, video and voice processing
- Virtual reality VR robots
