PIC18F2620T-I/SO
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2620 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 32768 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
PIC18F2620T-I/SO Overview
There is a 28-SOIC (0.295, 7.50mm Width) package available to save space. This is mounted using the Surface Mount method. Package Tape & Reel (TR) contains it. With a processor of PIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 25 I/Os on it. A component with the same part number as PIC18F2620 can be compared to other similar components. At DUAL, its terminals are located. 28 terminationals are present. It is a member of the PIC? 18F series of electrical components. By using a 5V voltage supply, high efficiency is possible. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. The method of Surface Mount is used to mount it. This device has a total of 28 pins. It falls under the category of Microcontrollers. Data and programs can be stored on the devices with a memory size of 64kB. There is 5V power source in this device. This device achieves excellent efficiency at frequencies of 40MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. It appears that there are 4 timers/counters in use. This part is an integral part of the PIC CPU family. There is an oscillator type Internal used in this circuit.
PIC18F2620T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2620T-I/SO Applications
There are a lot of Microchip Technology PIC18F2620T-I/SO Microcontroller applications.
- Electromechanical control
- DCS control intelligent sensor
- Coffee machines
- Routers
- Speed meter
- Set-top boxes
- Robots
- Television
- Instrument control
- Sonography (Ultrasound imaging)
