PIC18F2680-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Base Part Number | PIC18F2680 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 32768 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F2680-E/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. Mounted using Through Hole. In the package Tube, it is included. There is a PIC as core processor in this device. Work should be performed at a temperature of -40°C~125°C TA. There is FLASH program memory in it. 25 I/Os are present on the device. Based on the PIC18F2680 base part number, it can be compared with other components. DUAL is the location of its terminals. In this case, there are 28 terminationals. An electrical component such as this is included in the series PIC? 18F. Because of the 5V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 28 pins are used. Based on the Through Hole method, it is mounted. 28 pins are on it in total. It falls under the category of Microcontrollers. Using the devices' 64kB memory size, you can store programs and data. There is a source of power of 5V that powers this device. Using a frequency of 25MHz, it is very efficient. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. A total of 4 timers/counters have been set up. This part is an integral part of the PIC CPU family. An oscillator of type Internal is used.
PIC18F2680-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2680-E/SP Applications
There are a lot of Microchip Technology PIC18F2680-E/SP Microcontroller applications.
- Industrial robot
- Refrigerators
- Mice
- Projectors
- Current meter
- Digital set-top boxes
- Sonography (Ultrasound imaging)
- Smoke alarms
- Fax machines
- Air fryers
