PIC18F2680-I/SP
| Parameters | |
|---|---|
| Number of ADC Channels | 8 |
| Number of PWM Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18F2680 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 512 kb |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
PIC18F2680-I/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. It is mounted using the way of Through Hole. It comes in a Tube package. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. Memory type FLASH is used for program memory. It has a number of 25I/Os. It has a part number of PIC18F2680 that can be used to locate similar components. A DUAL position is assigned to its terminals. Currently, it consists of 28 terminationals. There are a number of electrical components in the PIC? 18F series, including this one. Because of the 5V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. For its construction, 28 pins are used. Mounting is performed in accordance with Surface Mount, Through Hole. It has a total of 28 pins on it. It is one of the components included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. Power is provided by a 5V source. It is highly efficient when it works at a frequency of 40MHz. There are currently 4 timers/counters set up on the system. It is part of the PIC CPU family. An oscillator of type Internal is used.
PIC18F2680-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F2680-I/SP Applications
There are a lot of Microchip Technology PIC18F2680-I/SP Microcontroller applications.
- Electrocardiogram (EKG)
- Ipad
- Kindle
- Industrial instrumentation devices
- Measuring revolving objects
- Heart rate monitors
- Calculators
- Computed Tomography (CT scan)
- Missile control
- Traditional industrial transformation
