PIC18F2680T-I/SO
| Parameters | |
|---|---|
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 32768 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F2680 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
PIC18F2680T-I/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. Mounted using Surface Mount. A package of Tape & Reel (TR) contains it. The device runs in PIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 25 I/Os on the board. A comparable component can be found by using the base part number PIC18F2680. A DUAL position is assigned to its terminals. 28 terminations are present in it. This electrical component is part of the PIC? 18F series. The 5V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A number of 28 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. Total number of pins is 28. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 64kB. A 5V source of power is being used to run it. When working at a frequency of 40MHz it is able to achieve excellent efficiency. When 5V is employed, designers can fully utilize its adaptability and supply voltage. There are currently 4 timers/counters set up on the system. It belongs to the PIC CPU family. An oscillator type Internal is required for it to work.
PIC18F2680T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F2680T-I/SO Applications
There are a lot of Microchip Technology PIC18F2680T-I/SO Microcontroller applications.
- Temperature sensing and controlling devices
- Automatic staplers
- Aerospace navigation systems
- Entertainment products
- Smoke alarms
- Wastewater treatment
- Heater/Fan
- Ipod
- Digital TVs
- Process control devices
