PIC18F26J11-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Base Part Number | PIC18F26J11 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 10 |
| Number of SPI Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F26J11-I/SP Overview
To save space, it is included in the 28-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. It is available in the Tube package. With a processor of PIC cores, the device is powered. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 16 I/Os on the board. To find equivalent components, use its PIC18F26J11 base part number. This device has terminals at DUAL. A 28 termination is contained within it. The electrical component is part of the series PIC? XLP? 18J. By using a 3V voltage supply, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. For its construction, 28 pins are used. Based on the Through Hole method, it is mounted. This device has a total of 28 pins. The component is included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 64kB. At a frequency of 48MHz, it can achieve excellent efficiency. A total of 5 timers/counters have been set up. This part is part of the PIC family of CPUs. Using oscillator type Internal makes it work.
PIC18F26J11-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F26J11-I/SP Applications
There are a lot of Microchip Technology PIC18F26J11-I/SP Microcontroller applications.
- Virtual reality VR robots
- Industrial robot
- Christmas lights
- Electrocardiogram (EKG)
- Leakage current tester
- Process control devices
- Sonography (Ultrasound imaging)
- Fire detection & safety devices
- Ipad
- Current meter
