PIC18F26J11-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F26J11 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 10 |
| Number of SPI Channels | 2 |
| Height | 1.8542mm |
| Length | 10.4902mm |
| Width | 5.588mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F26J11-I/SS Overview
To save space, it is included in the 28-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. It is available in the Tube package. A core processor of PIC is present in the device. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. A total of 16 I/Os are present. Other components that are comparable to it have the base part number PIC18F26J11. DUAL is the location of its terminals. In this case, there are 28 terminationals. In the PIC? XLP? 18J series, this electrical component is found. By using a 3V voltage supply, high efficiency is possible. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. A number of 28 pins are used to construct it. A method of mounting is used, which is Surface Mount. This device has a total of 28 pins. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 64kB that can be used to store programs and data. When working at a frequency of 48MHz it is able to achieve excellent efficiency. 5 counters/timers are currently active. This part is an integral part of the PIC CPU family. Using oscillator type Internal makes it work.
PIC18F26J11-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F26J11-I/SS Applications
There are a lot of Microchip Technology PIC18F26J11-I/SS Microcontroller applications.
- Refrigerators
- Paper shredders
- Television
- Temperature sensing and controlling devices
- Kindle
- Volt meter
- Nintendo
- Air fryers
- Sonography (Ultrasound imaging)
- Electromechanical control
