PIC18F26J13-I/SO
| Parameters | |
|---|---|
| Number of Programmable I/O | 3 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 2 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F26J13 |
| Pin Count | 28 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 22 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| CPU Family | PIC |
PIC18F26J13-I/SO Overview
A space-saving advantage is that it is included in the 28-SOIC (0.295, 7.50mm Width) package. Surface Mount is used for mounting. It comes in a Tube package. Devices with PIC core processors are available. In order to work effectively, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. The device has 22 I/Os. A component with the same part number as PIC18F26J13 can be compared to other similar components. The terminals of this device are set to DUAL. There are a total of 28 terminations in it. In the PIC? XLP? 18J series, this electrical component is found. The 2.5V supply voltage enables high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. There are a total of 28 pins on it. This is a component included in Microcontrollers. Memory size for the devices is 64kB, which can be used to store programs and data. This device achieves excellent efficiency at frequencies of 48MHz. There are 8 timers/counters. It is a member of the PIC family of CPUs. There are 3 programmable input/output ports on the chip. It works with an oscillator type Internal.
PIC18F26J13-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F26J13-I/SO Applications
There are a lot of Microchip Technology PIC18F26J13-I/SO Microcontroller applications.
- Virtual reality VR robots
- DDC control
- Heater/Fan
- Laminators
- Oscilloscopes
- Tape drives
- Nintendo
- Process control devices
- Television
- Auto-breaking system
