PIC18F26J13-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Base Part Number | PIC18F26J13 |
| Pin Count | 28 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 22 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 3 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 8.509mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F26J13-I/SP Overview
Due to its space-saving qualities, it is available in the 28-DIP (0.300, 7.62mm) package. The way of Through Hole is used to mount it. This item can be found in package Tube. Device with PIC core processor issupported. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. The device has 22 I/Os. A comparable component can be found by using the base part number PIC18F26J13. A DUAL position is assigned to its terminals. In this case, there are 28 terminationals. Part of the PIC? XLP? 18J series, this electrical component is used in a variety of applications. The supply voltage of 2.5V allows for high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. For its construction, 28 pins are used. During the mounting process, the device is mounted based on the Through Hole method. There are 28 pins on it. It belongs to the subcategory Microcontrollers. A device with a memory size of 64kB can store programs and data. Using a frequency of 48MHz, it is very efficient. 8 timer/counters are present. It is part of the PIC CPU family. The number 3 represents the number of programmable I/O ports on the board. It works with an oscillator type Internal.
PIC18F26J13-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F26J13-I/SP Applications
There are a lot of Microchip Technology PIC18F26J13-I/SP Microcontroller applications.
- Toasters
- Robotic prosthetic limbs
- Vacuum cleaners
- Ipod
- Data acquisition and control
- Multi-meter
- Radio
- Air fryers
- Walkie talkies
- Teletext terminals
