PIC18F26J50-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 48MHz |
| Base Part Number | PIC18F26J50 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 10 |
| Number of SPI Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F26J50-I/SP Overview
A space-saving advantage is that it is included in the 28-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. It comes in a Tube package. The device has a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. A total of 16 I/Os are present. It has a part number of PIC18F26J50 that can be used to locate similar components. At DUAL, its terminals are located. A 28 termination is contained within it. This electrical component is part of the PIC? XLP? 18J series. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. 28 pins are used to construct it. During the mounting process, the device is mounted based on the Through Hole method. On it, there are 28 pins. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 64kB. The system is highly efficient when working at a frequency of 48MHz. A total of 5 timers/counters have been set up. CPU family PIC comprises the part. There is an oscillator type Internal used in this circuit.
PIC18F26J50-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F26J50-I/SP Applications
There are a lot of Microchip Technology PIC18F26J50-I/SP Microcontroller applications.
- Digital set-top boxes
- Computed Tomography (CT scan)
- Industrial robot
- Firewalls
- X-ray
- Dishwashers
- Wastewater treatment
- Binding machines
- Keyboards
- Projectors
