PIC18F26K22-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES 2.3V MINIMUM SUPPLY AT 16 MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 48MHz |
| Base Part Number | PIC18F26K22 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 19x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 7 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 25 |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F26K22-E/SP Overview
To save space, it is included in the 28-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. It comes in the package?of a Tube. A PIC core processor powers the device. It is important to keep the temperature at -40°C~125°C TA while working. FLASH is the type of program memory used by it. 24 I/Os are present on the device. It has a base part number of PIC18F26K22 that can be used to find other components that are comparable. The position of the device is DUAL at terminal. It consists of 28 terminationals. It is a member of the PIC? XLP? 18K series of electrical components. By using a 5V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. It is constructed using 28 pins. In total, it has 28 pins. In Microcontrollers, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 64kB. It should be noted that 12mA represents the maximum supply current. Power is provided by a 2/5V source. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. It appears that there are 7 timers/counters in use. It is part of the PIC CPU family. The number 25 represents the number of programmable I/O ports on the board. The property of ALSO OPERATES 2.3V MINIMUM SUPPLY AT 16 MHZ is also possessed by it. An oscillator of type Internal is used.
PIC18F26K22-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F26K22-E/SP Applications
There are a lot of Microchip Technology PIC18F26K22-E/SP Microcontroller applications.
- Industrial instrumentation devices
- Data acquisition and control
- Graphic terminals
- Air fryers
- Mobile computers
- Instrument control
- PDAs, game consoles
- Dryers
- Fax machines
- Monitoring-temperature level, oil level, speed, distance, acceleration
