PIC18F26K22T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Additional Feature | ALSO OPERATES 2.3 V MINIMUM SUPPLY AT 20 MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F26K22 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 19x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 7 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Screening Level | TS 16949 |
| Number of Programmable I/O | 25 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F26K22T-I/ML Overview
For the purpose of saving space, it is available in the 28-VQFN Exposed Pad package. The way of Surface Mount is used to mount it. It comes in a Tape & Reel (TR) package. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. It has a type of program memory of FLASH. There are 24 I/Os on the board. A comparable component can be found by using the base part number PIC18F26K22. The terminals are positioned at QUAD. It consists of 28 terminationals. An electrical component such as this is included in the series PIC? XLP? 18K. The supply voltage of 5V allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. Total number of pins is 28. It is one of the components included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. 12mA is the maximum supply current. There is a source of power of 2/5V that powers this device. At a frequency of 64MHz, it exhibits excellent efficiency. There are 7 timers/counters. As part of the PIC CPU family, this component is included. There are a total of 25 programmable I/Os. ALSO OPERATES 2.3 V MINIMUM SUPPLY AT 20 MHZ also belongs to it. Using a Internal oscillator type, it works well.
PIC18F26K22T-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F26K22T-I/ML Applications
There are a lot of Microchip Technology PIC18F26K22T-I/ML Microcontroller applications.
- Playstation
- Robotic prosthetic limbs
- Heart rate monitors
- Smart instruments
- Firewalls
- Hearing aids
- Projector
- Current meter
- Switches
- Light sensing & controlling devices
