PIC18F26K40T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | IT ALSO OPERATES AT 2.5V MIN AT 32 MHZ AND 2.3V MIN AT 16 MHZ |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | PIC18F26K40 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 24x10b; D/A 1x5b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS 16949 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 32768 |
| Number of Timers | 9 |
| Number of External Interrupts | 3 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
PIC18F26K40T-I/SS Overview
Due to the benefits of saving space, it is available in the 28-SSOP (0.209, 5.30mm Width) package. Surface Mount is used for mounting. This item can be found in package Tape & Reel (TR). It is equipped with a PIC core processor. During work, the temperature should remain at -40°C~85°C TA. There is FLASH program memory in it. The device has 25 I/Os. Based on its base part number of PIC18F26K40, other similarly-sized components can be found. The terminals of this device are located at DUAL. 28 terminations are present in it. It is a member of the PIC? XLP? 18K series of electrical components. High efficiency is possible due to the 3.3V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. In the device, there is a memory capacity of 64kB which may be used to store programs and data. It performs extremely well at a frequency of 64MHz. There is also a property of IT ALSO OPERATES AT 2.5V MIN AT 32 MHZ AND 2.3V MIN AT 16 MHZ on it. In order to ensure normal operation, the supply voltage (Vsup) must remain above 3V. There is an oscillator type Internal used in this circuit.
PIC18F26K40T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
PIC18F26K40T-I/SS Applications
There are a lot of Microchip Technology PIC18F26K40T-I/SS Microcontroller applications.
- Tape drives
- ECG machine
- Current meter
- Home video and audio
- Heater/Fan
- DCS control intelligent sensor
- Missile control
- Toasters
- Fire detection & safety devices
- Blenders
