PIC18F26K80-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F26K80 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 3.6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | ECANbus, I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
| Number of UART Channels | 2 |
| Number of ADC Channels | 8 |
| Number of SPI Channels | 1 |
| Height | 2.3622mm |
| Length | 17.8816mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC18F26K80-E/SO Overview
For the purpose of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. This is mounted using the Surface Mount method. You can find it in the package of Tube. PIC core processor is present on the device. Work should be done at -40°C~125°C TA. Memory type FLASH is used for program memory. A total of 24 I/Os are available on this device. A comparable component can be found by using the base part number PIC18F26K80. The terminals of this device are located at DUAL. 28 terminationals are present. The PIC? XLP? 18K series includes this electrical component. The 3.3V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. The structure is composed of 28 pins. 28 pins are on it in total. Microcontrollers contains this component. The devices have a memory size of 64kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 64MHz. A total of 5 timers/counters have been set up. PIC CPUs are included in this part. In order to maintain normal operation, Vsup must be above 3V. An oscillator type Internal is required for it to work.
PIC18F26K80-E/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F26K80-E/SO Applications
There are a lot of Microchip Technology PIC18F26K80-E/SO Microcontroller applications.
- Process control devices
- Smartphones-calling, video calling, texting, email
- Sonography (Ultrasound imaging)
- Binding machines
- Guidance-GPS
- Heart rate monitors
- Magnetic resonance imaging (MRI)
- Process control devices
- Ipod
- Robotic prosthetic limbs
