PIC18F26K80-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 64MHz |
| Base Part Number | PIC18F26K80 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 3.6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | ECANbus, I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of UART Channels | 2 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 5 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F26K80-E/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. It comes in the package?of a Tube. Device with PIC core processor issupported. When working, it is recommended that the temperature be kept at -40°C~125°C TA. It has a type of program memory of FLASH. There are 24 I/Os on it, which makes it a very simple device. A component with the same part number as PIC18F26K80 can be compared to other similar components. DUAL is the location of its terminals. Currently, it consists of 28 terminationals. An electrical component such as this is included in the series PIC? XLP? 18K. The 3.3V supply voltage enables high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. 28 pins are used to construct it. It is equipped with 28 pins in total. Subcategory Microcontrollers includes this component. It is possible to store programs and data on the devices, as they have a memory size of 64kB. This device achieves excellent efficiency at frequencies of 64MHz. The part is a part of the PIC CPU family. During normal operation, the supply voltage (Vsup) should be kept above 3V. Internal is the oscillator type it uses.
PIC18F26K80-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F26K80-E/SP Applications
There are a lot of Microchip Technology PIC18F26K80-E/SP Microcontroller applications.
- Air fryers
- Electromechanical control
- Light sensing & controlling devices
- Current meter
- Wastewater treatment
- Fax machines
- Kindle
- Calculator
- Leakage current tester
- Missile control
