PIC18F27K40-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | OPERATES AT 2.3 V MINIMUM SUPPLY AT 16 MHZ |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 64MHz |
| Base Part Number | PIC18F27K40 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 9.5mA |
| Bit Size | 16 |
| Data Converter | A/D 24x10b; D/A 1x5b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 65536 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS 16949 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 3728 |
| Number of Timers | 7 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
PIC18F27K40-E/SS Overview
There is an option to purchase it in the 28-SSOP (0.209, 5.30mm Width) package, which saves space. Surface Mount is used for mounting. You can find it in the package of Tube. Device with PIC core processor issupported. During work, the temperature should remain at -40°C~125°C TA. FLASH is its program memory type. 25 I/Os can be found on it. In order to find similar components, it has a base part number of PIC18F27K40. At DUAL, it has its terminals. As far as terminations are concerned, there are 28 terminations present. An electrical component such as this is included in the series PIC? XLP? 18K. Because the supply voltage is 3V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. Data and programs can be stored on the devices with a memory size of 128kB. Supply current cannot exceed 9.5mA. It performs extremely well at a frequency of 64MHz. It has the property of OPERATES AT 2.3 V MINIMUM SUPPLY AT 16 MHZ as well. In order to maintain normal operation, Vsup must be above 2.5V. Internal is the oscillator type it uses.
PIC18F27K40-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
PIC18F27K40-E/SS Applications
There are a lot of Microchip Technology PIC18F27K40-E/SS Microcontroller applications.
- Removable disks
- Smoke alarms
- Smart instruments
- Guidance-GPS
- Gas monitoring systems
- Walkie talkies
- Firewalls
- Heart rate monitors
- Electromechanical control
- Routers
