PIC18F4220-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4220 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 2048 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4220-E/PT Overview
For space savings, it is available in the 44-TQFP package. A Surface Mount mounting method is used. This item can be found in package Tray. PIC core processor is present on the device. It is important to keep the temperature at -40°C~125°C TA while working. FLASH has been assigned to it as a program memory. The device has 36 I/Os. It has a part number of PIC18F4220 that can be used to locate similar components. QUAD is the location of its terminals. Currently, it consists of 44 terminationals. It is a member of the PIC? 18F series of electrical components. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. For its construction, 44 pins are used. Based on the Surface Mount method, it is mounted. It has a total of 44 pins on it. It falls under the category of Microcontrollers. Memory size for the devices is 4kB, which can be used to store programs and data. It is important to note that the maximum supply current is 10mA. A 5V power source powers it. It performs extremely well at a frequency of 25MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. In total, there are 5 timers and counters. The part is a part of the PIC CPU family. The oscillator type Internal is used to operate the device.
PIC18F4220-E/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4220-E/PT Applications
There are a lot of Microchip Technology PIC18F4220-E/PT Microcontroller applications.
- DDC control
- Multi-meter
- Removable disks
- Security systems
- Telephone sets
- Firewalls
- Fax machines
- Medical instruments chromatographs
- Process control devices
- Embedded gateways
