PIC18F4220-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 2V MIN SUPPLY |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4220 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 2048 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
PIC18F4220-I/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. This is mounted using the Surface Mount method. There is a Tube package available for it. The device runs in PIC core processor. The temperature should be kept at -40°C~85°C TA while working. Its type of program memory is FLASH. There are 36 I/Os on it. Based on the PIC18F4220 base part number, it can be compared with other components. The terminals are positioned at QUAD. It consists of 44 terminationals. Part of the PIC? 18F series, this electrical component is used in a variety of applications. Using the 5V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. 44 pins are used to construct it. A method of mounting is used, which is Surface Mount. A total of 44 pins are attached to it. Microcontrollers contains this component. The devices have a maximum memory size of 4kB that can be used to store programs and data. There is 5V power source in this device. The system is highly efficient when working at a frequency of 40MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. There are currently 5 timers/counters set up on the system. It is one of the members of the CPU family PIC. The property OPERATES AT 2V MIN SUPPLY is also present in it. Using a Internal oscillator type, it works well.
PIC18F4220-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4220-I/ML Applications
There are a lot of Microchip Technology PIC18F4220-I/ML Microcontroller applications.
- Mice
- Broadband technology, video and voice processing
- Hand-held metering systems
- Nintendo
- Oil and gas
- Electromechanical control
- Accu-check
- Calculators
- Television
- Equipment control
