PIC18F4221-I/ML
| Parameters | |
|---|---|
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4221 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 23mA |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
PIC18F4221-I/ML Overview
As a result, it is available in the 44-VQFN Exposed Pad package. It is mounted using the way of Surface Mount. There is a Tube package available for it. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 36 I/Os are present on the device. To find comparable components, use the PIC18F4221 base part number. The terminals of this device are located at QUAD. It consists of 44 terminationals. There are a number of electrical components in the PIC? 18F series, including this one. Because the supply voltage is 5V, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A number of 44 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. In total, it has 44 pins. In Microcontrollers, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 4kB. There is a maximum current supply of 23mA. Power comes from a source of 5V. It is highly efficient when it works at a frequency of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. A total of 4 timers/counters have been set up. PIC CPUs are included in this part. Internal is the oscillator type it uses.
PIC18F4221-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4221-I/ML Applications
There are a lot of Microchip Technology PIC18F4221-I/ML Microcontroller applications.
- Mice
- Microwave ovens
- Food and beverage
- Mobile computers
- Vacuum cleaners
- Wastewater treatment
- Computer/laptop
- Torpedo guidance
- Light sensing & controlling devices
- Electrocardiogram (EKG)
