PIC18F43K20-E/ML
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F43K20 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.5V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 36 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 20 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
PIC18F43K20-E/ML Overview
A space-saving advantage is that it is included in the 44-VQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tube. PIC core processor is present on the device. The temperature should be kept at -40°C~125°C TA while working. In terms of its program memory type, it is FLASH. 35 I/Os can be found on it. A comparable component can be found by using the base part number PIC18F43K20. At QUAD, its terminals are located. Currently, it consists of 44 terminationals. In the PIC? XLP? 18K series, this electrical component is found. The 3V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A total of 44 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. It is equipped with 44 pins in total. This is a component included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 8kB. It is important to note that the maximum supply current is 15mA. A 2/3.3V source is used for powering it. Working at a frequency of 48MHz results in excellent efficiency. A total of 4 timers/counters are present. As part of the PIC CPU family, this component is included. There are a total of 36 programmable I/Os. Moreover, it also has the property of ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 20 MHZ. Normal operation requires a supply voltage (Vsup) that is higher than 2.7V. It works with an oscillator type Internal.
PIC18F43K20-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F43K20-E/ML Applications
There are a lot of Microchip Technology PIC18F43K20-E/ML Microcontroller applications.
- X-ray
- Radio
- Electrocardiogram (EKG)
- Industrial robot
- DCS control intelligent sensor
- Industrial instrumentation devices
- Mice
- Embedded gateways
- Set-top boxes
- Information appliances (networking of household appliances)
