PIC18F43K20-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 20 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Base Part Number | PIC18F43K20 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 3.5V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 36 |
| Length | 51.7525mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F43K20-E/P Overview
For the purpose of saving space, it is available in the 40-DIP (0.600, 15.24mm) package. Mounted using Through Hole. In the package Tube, it is included. A PIC core processor powers the device. Work should be done at -40°C~125°C TA. The type of memory it uses is FLASH. 35 I/Os have been provided by the device. To find comparable components, use the PIC18F43K20 base part number. The terminals of this device are located at DUAL. In this case, there are 40 terminationals. It is a member of the PIC? XLP? 18K series of electrical components. Because of the 3V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. 40 pins are used to construct it. This mount is done in accordance with the method of Through Hole. Total number of pins is 40. This component is a part of Microcontrollers. A device with a memory size of 8kB can store programs and data. It is important to note that the maximum supply current is 15mA. A 2/3.3V source of power is being used to run it. Using a frequency of 48MHz, it is very efficient. 4 counters/timers are currently active. This part is an integral part of the PIC CPU family. There are a total of 36 programmable I/Os. There is also the property of ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 20 MHZ. A supply voltage (Vsup) above 2.7V is necessary for normal operation. An oscillator of type Internal is used.
PIC18F43K20-E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F43K20-E/P Applications
There are a lot of Microchip Technology PIC18F43K20-E/P Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Toys
- Sonography (Ultrasound imaging)
- Virtual reality VR robots
- Entertainment products
- Oscilloscopes
- Volt meter
- Hearing aids
- Information appliances (networking of household appliances)
- Food and beverage
