PIC18F4410-I/ML
| Parameters | |
|---|---|
| Number of I/O | 36 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 20 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4410 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
PIC18F4410-I/ML Overview
For space savings, it is available in the 44-VQFN Exposed Pad package. This is mounted using the Surface Mount method. Tube is the package that contains it. The device runs in PIC core processor. When working, the temperature should be kept at -40°C~85°C TA. It has a type of program memory of FLASH. There are 36 I/Os on it. It has a part number of PIC18F4410 that can be used to locate similar components. QUAD is the position of its terminals on the board. A 44 termination is contained within it. An electrical component such as this is included in the series PIC? 18F. The supply voltage of 5V allows for high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A total of 44 pins are required to construct this device. The method of Surface Mount is used to mount it. A total of 44 pins are attached to it. It falls under the category of Microcontrollers. Using the devices' 16kB memory size, you can store programs and data. There is 5V power source in this device. At a frequency of 40MHz, it can achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. In total, there are 4 timers and counters. This part is an integral part of the PIC CPU family. It works with an oscillator type Internal.
PIC18F4410-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4410-I/ML Applications
There are a lot of Microchip Technology PIC18F4410-I/ML Microcontroller applications.
- Switches
- Equipment control
- Torpedo guidance
- Smartphone
- Smart highways (navigation, traffic control, information monitoring and car service)
- ECG machine
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Washing machines
- Digital set-top boxes
- Blenders
