PIC18F4431-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18F4431 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 6.35mm |
| Length | 51.7525mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4431-E/P Overview
To save space, it is included in the 40-DIP (0.600, 15.24mm) package. The way of mounting it is Through Hole. In the package Tube, it is included. Devices with PIC core processors are available. When working, it is recommended that the temperature be kept at -40°C~125°C TA. In terms of its program memory type, it is FLASH. The device has 36 I/Os. A comparable component can be found by using the base part number PIC18F4431. The position of the device is DUAL at terminal. There are a total of 40 terminations in it. The PIC? 18F series includes this electrical component. Because the supply voltage is 5V, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. 40 pins are used to construct it. The mounting of this device is carried out following the method of Through Hole. It has a total of 40 pins on it. Subcategory Microcontrollers includes this component. In the device, there is a memory capacity of 16kB which may be used to store programs and data. The maximum supply current is set at 15mA. A 5V source is used for powering it. At a frequency of 40MHz, it exhibits excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5V in their designs. A total of 4 timers/counters are present. This part is an integral part of the PIC CPU family. Internal is the oscillator type it uses.
PIC18F4431-E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F4431-E/P Applications
There are a lot of Microchip Technology PIC18F4431-E/P Microcontroller applications.
- DDC control
- Process control devices
- Kindle
- Industrial robot
- Smoke alarms
- Fax machines
- Missile control
- Electromechanical control
- Toasters
- Aerospace navigation systems
