PIC18F4431-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4431 |
| Pin Count | 44 |
| Lead Pitch | 500μm |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 128 kb |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 10 |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4431-E/PT Overview
As a result, it is available in the 44-TQFP package. The way of Surface Mount is used to mount it. It comes in a Tray package. With a processor of PIC cores, the device is powered. Working at -40°C~125°C TA temperature is recommended. FLASH is its program memory type. 36 I/Os can be found on it. To find comparable components, use the PIC18F4431 base part number. The position of the device is QUAD at terminal. It consists of 44 terminationals. The electrical component is part of the series PIC? 18F. As a result of the 5V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. For its construction, 44 pins are used. This mount is done in accordance with the method of Surface Mount. In total, it has 44 pins. The component is included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 16kB. 15mA is the maximum supply current. It is powered by a 5V?source. It performs extremely well at a frequency of 40MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. There are 4 timers/counters. This part is an integral part of the PIC CPU family. Using a Internal oscillator type, it works well.
PIC18F4431-E/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4431-E/PT Applications
There are a lot of Microchip Technology PIC18F4431-E/PT Microcontroller applications.
- Answering machines
- Oil and gas
- Computer/laptop
- Process control devices
- Hand-held metering systems
- Switches
- Binding machines
- Fire detection & safety devices
- DDC control
- Paper shredders
