PIC18F4431-I/PT
| Parameters | |
|---|---|
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4431 |
| Pin Count | 44 |
| Lead Pitch | 500μm |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 128 kb |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 10 |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
PIC18F4431-I/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. The way of Surface Mount is used to mount it. It is available in the Tray package. A PIC core processor powers the device. Maintain a temperature of -40°C~85°C TA while working. The type of memory it uses is FLASH. There are 36 I/Os on it, which makes it a very simple device. It has a part number of PIC18F4431 that can be used to locate similar components. QUAD is the position of its terminals on the board. It consists of 44 terminationals. There are a number of electrical components in the PIC? 18F series, including this one. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 44 pins are used to construct it. The method of Surface Mount is used to mount it. A total of 44 pins are attached to it. It belongs to the subcategory Microcontrollers. A device with a memory size of 16kB can store programs and data. Supply current cannot exceed 15mA. There is 5V power source in this device. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. 5V offers full adaptability and voltage supply when it is employed by designers. There are currently 4 timers/counters set up on the system. As part of the PIC CPU family, this component is included. An oscillator type Internal is required for it to work.
PIC18F4431-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4431-I/PT Applications
There are a lot of Microchip Technology PIC18F4431-I/PT Microcontroller applications.
- Nintendo
- Mice
- Binding machines
- Security systems
- Hand-held metering systems
- Copiers
- Dialysis machines (performs function of liver)
- Embedded gateways
- Fire detection & safety devices
- Fax machines
