PIC18F44J10T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F44J10 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 24mA |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 16 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F44J10T-I/PT Overview
For the purpose of saving space, it is available in the 44-TQFP package. Surface Mount is used for mounting. It comes in a Tape & Reel (TR) package. It is equipped with a PIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. There is FLASH program memory in it. A total of 32 I/Os are available on this device. Other components that are comparable to it have the base part number PIC18F44J10. QUAD is the position of its terminals on the board. Currently, it consists of 44 terminationals. The PIC? 18J series contains this electrical component. High efficiency is possible due to the 3V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. There are 44 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. In total, it has 44 pins. This is a component included in Microcontrollers. Using the devices' 16kB memory size, you can store programs and data. Supply current is maximum at 24mA. Working at a frequency of 40MHz results in excellent efficiency. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are 3 timers/counters. It works with an oscillator type Internal.
PIC18F44J10T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F44J10T-I/PT Applications
There are a lot of Microchip Technology PIC18F44J10T-I/PT Microcontroller applications.
- Computers and laptops-video calling, email, blogging
- DCS control intelligent sensor
- Sonography (Ultrasound imaging)
- Auto-breaking system
- Laminators
- Projectors
- Data acquisition and control
- 3D printers
- Petrochemical
- Fax machines
