PIC18F4510-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4510 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| CPU Family | PIC |
| Number of ADC Channels | 13 |
| Number of USB Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4510-I/PT Overview
There is a 44-TQFP package available to save space. Surface Mount is used for mounting. Tray is the package that contains it. A PIC core processor powers the device. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. There are 36 I/Os on it. A comparable component can be found by using the base part number PIC18F4510. QUAD is the location of its terminals. A 44 termination is contained within it. The PIC? 18F series includes this electrical component. The supply voltage of 5V allows for high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. There are 44 pins used in the construction of this device. It is mounted based on the method of Surface Mount. This device has a total of 44 pins. This component is a part of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 32kB. Power is provided by a 5V source. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. 4 timers/counters are in use. PIC CPUs are included in this part. Using an oscillator type of Internal, it works.
PIC18F4510-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4510-I/PT Applications
There are a lot of Microchip Technology PIC18F4510-I/PT Microcontroller applications.
- Digital set-top boxes
- Volt meter
- Dishwashers
- Food and beverage
- Smart highways (navigation, traffic control, information monitoring and car service)
- Current meter
- Home video and audio
- Vacuum cleaners
- Automatic control
- Blenders
