PIC18F4510T-I/PT
| Parameters | |
|---|---|
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4510 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 20 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
PIC18F4510T-I/PT Overview
For space savings, it is available in the 44-TQFP package. Surface Mount is used for mounting. Package Tape & Reel (TR) contains it. With a processor of PIC cores, the device is powered. During work, the temperature should remain at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 36 I/Os on it, which makes it a very simple device. To find equivalent components, use its PIC18F4510 base part number. The terminals of this device are located at QUAD. A 44 termination is contained within it. This electrical component is part of the PIC? 18F series. It is possible to achieve high efficiency with a 5V supply voltage. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. It is constructed using 44 pins. Mounting is performed in accordance with Surface Mount. A total of 44 pins are attached to it. In Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 32kB. A 5V source is used for powering it. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. Using 5V's adaptability as a supply voltage allows designers to maximize its use. The number of timers and counters is 4. PIC CPUs are included in this part. It works with an oscillator type Internal.
PIC18F4510T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4510T-I/PT Applications
There are a lot of Microchip Technology PIC18F4510T-I/PT Microcontroller applications.
- Process control devices
- Smart highways (navigation, traffic control, information monitoring and car service)
- Instrument control
- Mice
- Digital set-top boxes
- Petrochemical
- Guidance-GPS
- Computer/laptop
- Mobile computers
- Smart instruments
