PIC18F4525-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4525 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 48KB 24K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 35mA |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4525-E/ML Overview
As a result, it is available in the 44-VQFN Exposed Pad package. It is mounted using the way of Surface Mount. Tube is the package that contains it. The device runs in PIC core processor. When working, the temperature should be kept at -40°C~125°C TA. FLASH is the type of program memory used by it. 36 I/Os have been provided by the device. Based on its base part number of PIC18F4525, other similarly-sized components can be found. The terminals of this device are set to QUAD. There are a total of 44 terminations in it. Part of the PIC? 18F series, this electrical component is used in a variety of applications. By using a 5V voltage supply, high efficiency is possible. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A number of 44 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. On it, there are 44 pins. This component is a part of Microcontrollers. In the device, there is a memory capacity of 48kB which may be used to store programs and data. A maximum supply current of 35mA is set. It is powered by a 5V?source. It performs extremely well at a frequency of 25MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. The number of timers and counters is 4. This part is part of the PIC family of CPUs. It works with an oscillator type Internal.
PIC18F4525-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4525-E/ML Applications
There are a lot of Microchip Technology PIC18F4525-E/ML Microcontroller applications.
- Magnetic resonance imaging (MRI)
- ECG machine
- Dryers
- Digital TVs
- Electronic jamming systems
- Blood pressure monitors
- Home appliances
- Heater/Fan
- Volt meter
- Switches
