PIC18F4585-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Base Part Number | PIC18F4585 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 48KB 24K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 44 |
| Length | 52.26mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4585-E/P Overview
It is available in the 40-DIP (0.600, 15.24mm) package for the benefit of saving space. A Through Hole mounting method is used. There is a Tube package available for it. It is equipped with a PIC core processor. Work should be performed at a temperature of -40°C~125°C TA. FLASH has been assigned to it as a program memory. There are 36 I/Os on the board. Based on its base part number of PIC18F4585, other similarly-sized components can be found. This device has terminals at DUAL. This circuit consists of 40 terminationals. An electrical component such as this is included in the series PIC? 18F. By using a 5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 40 pins. As a result, it is mounted in accordance with Through Hole. There are a total of 40 pins on it. It is one of the components included in Microcontrollers. Using the devices' 48kB memory size, you can store programs and data. Power is provided by a 5V source. Working at a frequency of 25MHz results in excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5V in their designs. A total of 4 timers/counters are present. The part is a part of the PIC CPU family. 44 is the number of programmable I/O. An oscillator of type Internal is used.
PIC18F4585-E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F4585-E/P Applications
There are a lot of Microchip Technology PIC18F4585-E/P Microcontroller applications.
- Virtual reality VR robots
- Mice
- Guidance-GPS
- Temperature sensing and controlling devices
- Fabric
- Torpedo guidance
- Removable disks
- Dryers
- Projectors
- Instrument control
