PIC18F45J11-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F45J11 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 256 kb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 13 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F45J11-I/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. Mounted using Surface Mount. In the package Tray, it is included. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 34 I/Os on it, which makes it a very simple device. It has a base part number of PIC18F45J11 that can be used to find other components that are comparable. QUAD is the location of its terminals. Currently, it consists of 44 terminationals. The PIC? XLP? 18J series contains this electrical component. By using a 3V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. The structure is constructed from 44 pins. During the mounting process, the device is mounted based on the Surface Mount method. In total, it has 44 pins. It falls under the category of Microcontrollers. Using the devices' 32kB memory size, you can store programs and data. It is highly efficient when it works at a frequency of 48MHz. A total of 5 timers/counters are present. This part is part of the PIC family of CPUs. Using an oscillator type of Internal, it works.
PIC18F45J11-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F45J11-I/PT Applications
There are a lot of Microchip Technology PIC18F45J11-I/PT Microcontroller applications.
- Petrochemical
- Light sensing & controlling devices
- Oscilloscopes
- Hand-held metering systems
- Fire detection & safety devices
- Digital cameras
- Accu-check
- DCS control intelligent sensor
- Christmas lights
- PDAs, game consoles
