PIC18F4610T-I/PT
| Parameters | |
|---|---|
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4610 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 20 |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
PIC18F4610T-I/PT Overview
For space savings, it is available in the 44-TQFP package. It is mounted using the way of Surface Mount. There is a Tape & Reel (TR) package available for it. With a processor of PIC cores, the device is powered. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 36 I/Os are present. A component with the same part number as PIC18F4610 can be compared to other similar components. The position of the device is QUAD at terminal. This circuit consists of 44 terminationals. An electrical component such as this is included in the series PIC? 18F. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. There are 44 pins used in the construction of this device. It is mounted based on the method of Surface Mount. There are a total of 44 pins on it. Subcategory Microcontrollers includes this component. In order to store data and programs, the devices have a memory size of 64kB. A 5V source of power is being used to run it. It is highly efficient when it works at a frequency of 40MHz. When 5V is employed, designers can fully utilize its adaptability and supply voltage. There are currently 4 timers/counters set up on the system. It is part of the PIC CPU family. An oscillator type Internal is required for it to work.
PIC18F4610T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4610T-I/PT Applications
There are a lot of Microchip Technology PIC18F4610T-I/PT Microcontroller applications.
- Projector
- Industrial instrumentation devices
- Calculator
- Projectors
- Electrocardiogram (EKG)
- Teletext terminals
- Digital set-top boxes
- Firewalls
- Washing machine
- DDC control
