PIC18F4680-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18F4680 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| ROM (words) | 32768 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 44 |
| Number of PWM Channels | 4 |
| Length | 52.26mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4680-E/P Overview
For space savings, it is available in the 40-DIP (0.600, 15.24mm) package. It is mounted using the way of Through Hole. It comes in a Tube package. Device with PIC core processor issupported. Work should be performed at a temperature of -40°C~125°C TA. The type of memory in which this program is stored is FLASH. The device has 36 I/Os. It has a base part number of PIC18F4680 that can be used to find other components that are comparable. The terminals are positioned at DUAL. It has 40 terminationals. An electrical component such as this is included in the series PIC? 18F. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. It is constructed with 40 pins. Based on the Through Hole method, it is mounted. It has a total of 40 pins on it. This component is a part of Microcontrollers. In the device, there is a memory capacity of 64kB which may be used to store programs and data. A 5V source of power is being used to run it. This device achieves excellent efficiency at frequencies of 40MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. This part is an integral part of the PIC CPU family. There are 44 programmable input/output ports on the chip. The oscillator type Internal is used to operate the device.
PIC18F4680-E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18F4680-E/P Applications
There are a lot of Microchip Technology PIC18F4680-E/P Microcontroller applications.
- Washing machines
- Accu-check
- Medical instruments chromatographs
- Fire alarms
- Smart highways (navigation, traffic control, information monitoring and car service)
- Hand-held metering systems
- Firewalls
- Graphic terminals
- Coffee machines
- Microwave ovens
