PIC18F4680T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4680 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 32768 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4680T-I/ML Overview
For space savings, it is available in the 44-VQFN Exposed Pad package. The way of mounting it is Surface Mount. In the package Tape & Reel (TR), it is included. It is equipped with a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. A total of 36 I/Os are present. Based on the PIC18F4680 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. 44 terminationals are present. In the PIC? 18F series, this electrical component is found. Because of the 5V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed using 44 pins. The mounting of this device is carried out following the method of Surface Mount. This device has a total of 44 pins. This is a component included in Microcontrollers. The devices have a memory size of 64kB that can be used to store programs and data. There is 5V power source in this device. It performs extremely well at a frequency of 40MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5V in their designs. It appears that there are 4 timers/counters in use. It is part of the PIC CPU family. There is an oscillator type Internal used in this circuit.
PIC18F4680T-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4680T-I/ML Applications
There are a lot of Microchip Technology PIC18F4680T-I/ML Microcontroller applications.
- Playstation
- Switches
- Blood pressure monitors
- Virtual reality VR robots
- DCS control intelligent sensor
- Data acquisition and control
- Routers
- Embedded gateways
- Computed Tomography (CT scan)
- Microwave ovens
