PIC18F46J50T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F46J50 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Supply Current-Max | 22.7mA |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F46J50T-I/ML Overview
There is an option to purchase it in the 44-VQFN Exposed Pad package, which saves space. In this case, it is mounted using the method of Surface Mount. It comes in a Tape & Reel (TR) package. Device with PIC core processor issupported. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. The device has 34 I/Os. Based on the PIC18F46J50 base part number, it can be compared with other components. The terminals of this device are set to QUAD. It consists of 44 terminationals. The PIC? XLP? 18J series includes this electrical component. This is due to the fact that the supply voltage is 2.5V, resulting in high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 44 pins are used. The mounting of this device is carried out following the method of Surface Mount. Total number of pins is 44. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 64kB which may be used to store programs and data. Supply current is maximum at 22.7mA. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. There are 5 timers/counters. PIC CPUs are included in this part. Using a Internal oscillator type, it works well.
PIC18F46J50T-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F46J50T-I/ML Applications
There are a lot of Microchip Technology PIC18F46J50T-I/ML Microcontroller applications.
- Electromechanical control
- DCS control intelligent sensor
- Leakage current tester
- Fabric
- Paper shredders
- Computers and laptops-video calling, email, blogging
- Toys
- Hearing aids
- Xbox
- Telephone sets
