PIC18F46K20-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F46K20 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.5V |
| Interface | I2C, SPI, Serial, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 512 kb |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 36 |
| Number of ADC Channels | 14 |
| Number of PWM Channels | 2 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F46K20-E/ML Overview
To save space, it is included in the 44-VQFN Exposed Pad package. A Surface Mount mounting method is used. It comes in a Tube package. Devices with PIC core processors are available. Work should be done at -40°C~125°C TA. Its type of program memory is FLASH. There are 35 I/Os on the board. Based on the PIC18F46K20 base part number, it can be compared with other components. The terminals of this device are set to QUAD. A 44 termination is contained within it. In the PIC? XLP? 18K series, this electrical component is found. Because of the 3V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. It is constructed using 44 pins. A method of mounting is used, which is Surface Mount. Total number of pins is 44. This component is a part of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. This device achieves excellent efficiency at frequencies of 64MHz. A total of 4 timers/counters are present. As part of the PIC CPU family, this component is included. There are a total of 36 programmable I/Os. Using a Internal oscillator type, it works well.
PIC18F46K20-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F46K20-E/ML Applications
There are a lot of Microchip Technology PIC18F46K20-E/ML Microcontroller applications.
- DCS control intelligent sensor
- Embedded gateways
- Industrial instrumentation devices
- Mobile computers
- Electromechanical control
- Microwave ovens
- Leakage current tester
- Automatic control
- Blood pressure monitors
- Air fryers
