PIC18F47J53-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F47J53 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| Nominal Supply Current | 580μA |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 13x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 22 |
| Number of UART Channels | 2 |
| Number of ADC Channels | 13 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F47J53-I/PT Overview
For space savings, it is available in the 44-TQFP package. The way of mounting it is Surface Mount. In the package Tray, it is included. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 34 I/Os are present. In order to find similar components, it has a base part number of PIC18F47J53. This device has terminals at QUAD. It has 44 terminationals. The PIC? XLP? 18J series contains this electrical component. The 2.5V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. There are 44 pins used in the construction of this device. It is equipped with 44 pins in total. In the subcategory of Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. It performs extremely well at a frequency of 48MHz. This part is part of the PIC family of CPUs. There are a total of 22 programmable I/Os available. Using an oscillator type of Internal, it works.
PIC18F47J53-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F47J53-I/PT Applications
There are a lot of Microchip Technology PIC18F47J53-I/PT Microcontroller applications.
- Tape drives
- Robotic prosthetic limbs
- Hand-held metering systems
- Air fryers
- Dryers
- Firewalls
- Process control devices
- Blenders
- Traditional industrial transformation
- Petrochemical
