PIC18F47J53T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F47J53 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.15V |
| Interface | I2C, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.15V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 21.5mA |
| Bit Size | 8 |
| Data Converter | A/D 13x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 8 |
| ROM (words) | 131072 |
| CPU Family | PIC |
| Number of Programmable I/O | 22 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F47J53T-I/PT Overview
Due to the benefits of saving space, it is available in the 44-TQFP package. In this case, it is mounted using the method of Surface Mount. It is available in the Tape & Reel (TR) package. With a processor of PIC cores, the device is powered. When working, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 34 I/Os are present on the device. It has a base part number of PIC18F47J53 that can be used to find other components that are comparable. The terminals of this device are set to QUAD. This circuit consists of 44 terminationals. The PIC? XLP? 18J series includes this electrical component. The supply voltage of 2.5V allows for high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. It is constructed using 44 pins. This device has a total of 44 pins. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 128kB. Supply current cannot exceed 21.5mA. A 2.5/3.3V source is used for powering it. It performs extremely well at a frequency of 48MHz. There are currently 8 timers/counters set up on the system. As part of the PIC CPU family, this component is included. There are a total of 22 programmable I/Os. Normal operation requires a supply voltage (Vsup) that is higher than 2.15V. Using an oscillator type Internal, it operates.
PIC18F47J53T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F47J53T-I/PT Applications
There are a lot of Microchip Technology PIC18F47J53T-I/PT Microcontroller applications.
- Information appliances (networking of household appliances)
- Wastewater treatment
- Playstation
- Air fryers
- Refrigerators
- Telephone sets
- Robots
- Home appliances
- Heart rate monitors
- Smart instruments
