PIC18F64J11T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY AT 8 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F64J11 |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.35V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F64J11T-I/PT Overview
For space savings, it is available in the 64-TQFP package. The way of Surface Mount is used to mount it. It is available in the Tape & Reel (TR) package. A PIC core processor powers the device. Work should be done at -40°C~85°C TA. Memory type FLASH is used for program memory. There are 51 I/Os on it, which makes it a very simple device. It has a part number of PIC18F64J11 that can be used to locate similar components. At QUAD, it has its terminals. In this case, there are 64 terminationals. Part of the PIC? 18J series, this electrical component is used in a variety of applications. The 2.5V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. For its construction, 64 pins are used. It is mounted based on the method of Surface Mount. This device has a total of 64 pins. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 16kB which may be used to store programs and data. Powered by a 2.5/3.3V source. At a frequency of 40MHz, it exhibits excellent efficiency. It appears that there are 4 timers/counters in use. As part of the PIC CPU family, this component is included. There are a total of 52 programmable I/Os available. There is also a property of ALSO OPERATES AT 2V MINIMUM SUPPLY AT 8 MHZ on it. Vsup should be kept above 2.35V for normal operation. Using an oscillator type of Internal, it works.
PIC18F64J11T-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F64J11T-I/PT Applications
There are a lot of Microchip Technology PIC18F64J11T-I/PT Microcontroller applications.
- Routers
- Dialysis machines (performs function of liver)
- Wastewater treatment
- Projectors
- Computed Tomography (CT scan)
- Vacuum cleaners
- Oscilloscopes
- Missile control
- Broadband technology, video and voice processing
- Set-top boxes
