PIC18F65J10T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F65J10 |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 16384 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F65J10T-I/PT Overview
Due to its space-saving qualities, it is available in the 64-TQFP package. The way of Surface Mount is used to mount it. A package of Tape & Reel (TR) contains it. Devices with PIC core processors are available. Working at -40°C~85°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. It has a number of 50I/Os. A component with the same part number as PIC18F65J10 can be compared to other similar components. The terminals of this device are set to QUAD. This circuit consists of 64 terminationals. Part of the PIC? 18J series, this electrical component is used in a variety of applications. By using a 2.5V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A total of 64 pins are required to construct this device. Based on the Surface Mount method, it is mounted. This device has a total of 64 pins. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 32kB. The system is highly efficient when working at a frequency of 40MHz. 5 timers/counters are in use. It belongs to the PIC CPU family. Moreover, it also has the property of ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ. Internal is the oscillator type it uses.
PIC18F65J10T-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F65J10T-I/PT Applications
There are a lot of Microchip Technology PIC18F65J10T-I/PT Microcontroller applications.
- Petrochemical
- Data acquisition and control
- Gas monitoring systems
- Pacemakers (used to control abnormal heart rhythm)
- Wastewater treatment
- Guidance-GPS
- Microwave ovens
- Telephone sets
- Xbox
- Fire detection & safety devices
