PIC18F65J90T-I/PT
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F65J90 |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 16mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of PWM Channels | 2 |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
PIC18F65J90T-I/PT Overview
For the purpose of saving space, it is available in the 64-TQFP package. In this case, it is mounted using the method of Surface Mount. A package of Tape & Reel (TR) contains it. A core processor of PIC is present in the device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. 51 I/Os are present on the device. It has a part number of PIC18F65J90 that can be used to locate similar components. QUAD is the location of its terminals. 64 terminations are present in it. There are a number of electrical components in the PIC? 18J series, including this one. Because the supply voltage is 2.5V, high efficiency can be achieved. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. For its construction, 64 pins are used. During the mounting process, the device is mounted based on the Surface Mount method. A total of 64 pins are attached to it. This component is a part of Microcontrollers. The devices have a memory size of 32kB that can be used to store programs and data. Supply current cannot exceed 16mA. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. The number of timers and counters is 4. The part is a part of the PIC CPU family. The oscillator type Internal is used to operate the device.
PIC18F65J90T-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F65J90T-I/PT Applications
There are a lot of Microchip Technology PIC18F65J90T-I/PT Microcontroller applications.
- Keyboards
- PDAs, game consoles
- Air fryers
- Electronic jamming systems
- Hand-held metering systems
- Fax machines
- 3D printers
- Multi-meter
- Projector
- Equipment control
