PIC18F65J94-I/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Base Part Number | PIC18F65J94 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 16x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 8 |
| Address Bus Width | 16 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Boundary Scan | NO |
| RAM (words) | 4000 |
| Number of Serial I/Os | 4 |
| Number of External Interrupts | 42 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
PIC18F65J94-I/MR Overview
For the purpose of saving space, it is available in the 64-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. In the package Tube, it is included. A core processor of PIC is present in the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. A total of 52 I/Os are available on this device. It has a part number of PIC18F65J94 that can be used to locate similar components. At QUAD, its terminals are located. As far as terminations are concerned, there are 64 terminations present. The PIC? XLP? 18J series contains this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A total of 64 pins are required to construct this device. In the subcategory of Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 32kB. Supply current is maximum at 7mA. Power is provided by a 2.5/3.3V source. The system is highly efficient when working at a frequency of 64MHz. 8 timers/counters are in use. It belongs to the PIC CPU family. Normal operation requires a supply voltage (Vsup) above 2V. An oscillator type Internal is required for it to work.
PIC18F65J94-I/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F65J94-I/MR Applications
There are a lot of Microchip Technology PIC18F65J94-I/MR Microcontroller applications.
- Firewalls
- Fax machines
- Torpedo guidance
- Projector
- Projectors
- Toasters
- Ipad
- Safety -airbags, automatic braking system (ABS)
- Heater/Fan
- Leakage current tester
