PIC18F65K22-E/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F65K22 |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 24mA |
| Bit Size | 32 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 8 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18F65K22-E/MR Overview
For space savings, it is available in the 64-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. Package Tube contains it. A PIC core processor powers the device. Maintain a temperature of -40°C~125°C TA while working. FLASH has been assigned to it as a program memory. It has a number of 53I/Os. Based on its base part number of PIC18F65K22, other similarly-sized components can be found. The terminals of this device are set to QUAD. 64 terminationals are present. This electrical component is part of the PIC? XLP? 18K series. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. It is constructed using 64 pins. In total, it has 64 pins. In Microcontrollers, this component is included. Using the devices' 32kB memory size, you can store programs and data. It is important to note that the maximum supply current is 24mA. There is 2/5V power source in this device. At a frequency of 64MHz, it exhibits excellent efficiency. In total, there are 8 timers and counters. This part is an integral part of the PIC CPU family. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. Internal is the oscillator type it uses.
PIC18F65K22-E/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F65K22-E/MR Applications
There are a lot of Microchip Technology PIC18F65K22-E/MR Microcontroller applications.
- Vacuum cleaners
- Removable disks
- DVD\DV\MP3 players
- Leakage current tester
- Smart highways (navigation, traffic control, information monitoring and car service)
- Accu-check
- Torpedo guidance
- Aerospace navigation systems
- Printers
- Petrochemical
